Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

Reaction Engines Sabre/Scimitar

Tech Log The very best in practical technical discussion on the web

Reaction Engines Sabre/Scimitar

Old 22nd Mar 2011, 18:06
  #41 (permalink)  
Thread Starter
 
Join Date: Dec 2010
Location: New York & California
Posts: 414
Likes: 0
Received 0 Likes on 0 Posts
MG23,

While it may not be economical, most cool ideas aren't exactly economical either. The American SST program was an awesome design, and had there not been all those tree-hugging hippies making a stink about how the plane would make too much noise and pollute the ozone layer (the effects were drastically exaggerated); it probably would have flown. As I understand it, most of the problems with the 2707-300 had been worked out by this point.

Last edited by Jane-DoH; 3rd Apr 2011 at 05:15.
Jane-DoH is offline  
Old 25th Mar 2011, 18:46
  #42 (permalink)  
Thread Starter
 
Join Date: Dec 2010
Location: New York & California
Posts: 414
Likes: 0
Received 0 Likes on 0 Posts
Any idea how resistant this thing would be to FOD? With that intercooler in the front, it looks like it would do pretty poorly...
Jane-DoH is offline  
Old 3rd Apr 2011, 05:19
  #43 (permalink)  
Thread Starter
 
Join Date: Dec 2010
Location: New York & California
Posts: 414
Likes: 0
Received 0 Likes on 0 Posts
Looking at the design, it clearly uses exhaust-gasses to drive the aft-fan turbine; does it use exhaust-gasses to drive the core turbine, or does it use hydrogen expansion to drive the turbine? Looking at some of these diagrams, it is unclear.
Jane-DoH is offline  
Old 3rd Apr 2011, 16:07
  #44 (permalink)  
 
Join Date: Jul 2009
Location: Not far from a big Lake
Age: 81
Posts: 1,454
Likes: 0
Received 0 Likes on 0 Posts
JD, which design are you referring to, Atrex, Sabre or Scimitar?

No exhaust driven turbines in Sabre, they are all expansion turbines using either hydrogen or helium.
Machinbird is offline  
Old 3rd Apr 2011, 19:12
  #45 (permalink)  
Thread Starter
 
Join Date: Dec 2010
Location: New York & California
Posts: 414
Likes: 0
Received 0 Likes on 0 Posts
Machinbird

JD, which design are you referring to, Atrex, Sabre or Scimitar?
Scimitar
Jane-DoH is offline  
Old 3rd Apr 2011, 20:22
  #46 (permalink)  
 
Join Date: Jul 2009
Location: Not far from a big Lake
Age: 81
Posts: 1,454
Likes: 0
Received 0 Likes on 0 Posts
J-D
The drawings for Scimitar are apparently intentionally unclear, however it appears that the hydrogen pre-burner exhaust is also powering the hub turbine for the fan as well as providing some fuel for the rocket motor and afterburner sections. The main turbine appears to be an expansion turbine since it is not associated with a combustion area of the engine.

Machinbird is offline  
Old 4th Apr 2011, 02:25
  #47 (permalink)  
Thread Starter
 
Join Date: Dec 2010
Location: New York & California
Posts: 414
Likes: 0
Received 0 Likes on 0 Posts
Machinbird

As I understand the Scimitar doesn't have a rocket-cycle...
Jane-DoH is offline  
Old 4th Apr 2011, 03:43
  #48 (permalink)  
 
Join Date: Jul 2009
Location: Not far from a big Lake
Age: 81
Posts: 1,454
Likes: 0
Received 0 Likes on 0 Posts
J-D, That may be true, but that central "combustor" with the convergent divergent nozzle is so close to one in geometry that there isn't much difference. I suppose the real question is whether or not the head end of that combustor is closed and able to develop high chamber pressures or not.
Machinbird is offline  
Old 4th Apr 2011, 07:49
  #49 (permalink)  
Thread Starter
 
Join Date: Dec 2010
Location: New York & California
Posts: 414
Likes: 0
Received 0 Likes on 0 Posts
Machinbird

That may be true, but that central "combustor" with the convergent divergent nozzle is so close to one in geometry that there isn't much difference.
In terms of exhaust velocity, you're right. Regardless, rockets aren't air breathing, and this engine is.

I suppose the real question is whether or not the head end of that combustor is closed and able to develop high chamber pressures or not.
High chamber pressures would be consistent with a rocket right?
Jane-DoH is offline  
Old 27th Apr 2012, 12:18
  #50 (permalink)  
 
Join Date: May 2011
Location: Glasgow
Age: 40
Posts: 642
Likes: 0
Received 0 Likes on 0 Posts
Looks like they've started testing the pre-cooler before looking for more money:
BBC News - Key tests for Skylon spaceplane project
riverrock83 is offline  
Old 30th Apr 2012, 00:17
  #51 (permalink)  
 
Join Date: Oct 2007
Location: A better place.
Posts: 2,318
Received 23 Likes on 15 Posts
Wink

Following this thread with some interest from the antipodes.
A country with red earth and hopping animals...
That'd be one of the places that would benefit if this engine and the A2 design ever became a reality.
Can you imagine how life would change if it was possible to commute say London - Sydney in 4 hours?
I am by no means rich but I'd fork out $10,000 to fly just once on the thing - Mach 5 - that's a mile a second, people - X15 speed.
Imagine the economic multiplier effects to business, industry etc.
I would have thought $12bn would have been a relatively small development cost to pay for such paradigm changing technology - about the price of the A380?
From what you all seem to be saying though - the Sabre/Scimitar design appears to be a long pursued pipe-dream.
Are there any engineers following this thread who can offer a reasoned assessment of whether this thing will ever fly?
Excuse my naivety, but personally I hope I live long enough to see the world's population able to commute at speeds internationally as they do domestically at the moment.
Work the week in New York, and Friday night, commute home to Aussie for the weekend...
tartare is offline  
Old 30th Apr 2012, 01:17
  #52 (permalink)  
 
Join Date: Oct 2007
Location: A better place.
Posts: 2,318
Received 23 Likes on 15 Posts
...very late on Friday night of course!
tartare is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.