lift Augmentation & Stability
Thread Starter
Join Date: Aug 2014
Location: Edinburgh
Age: 36
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
lift Augmentation & Stability
On the chapter of the above title and learning Static & Dynamic stability, i think i get the both meanings; Positive, Neutral, Negative! I'm sure you guys know the definitions.
My question is, why is there two types for this matter? Doesn't Dynamic stability not cover Static stability?
Won't Static stability not turn into dynamic stability because the aircraft will be moving over a set time?
My question is, why is there two types for this matter? Doesn't Dynamic stability not cover Static stability?
Won't Static stability not turn into dynamic stability because the aircraft will be moving over a set time?
Join Date: Jun 2013
Location: solihull
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Static stability describes the immediate response to a disturbance, dynamic stability describes the response over a longish time. A plane which has positive static stability can have any of positive, neutral or negative dynamic.
Think of a pendulum. It has good static stability in that, when displaced from neutral and then released, it will try to return to neutral. Problem is that it will then overshoot to the opposite side by nearly as much as the first displacement, before swinging back again.
So the pendulum is statically stable, but its dynamic stability is roughly neutral. If some kind of damper is fitted, it will retain its static stability and gain some dynamic stability.
Now think of a pencil standing vertically upright on a flat, horizontal surface. When the top of it is displaced slightly, it will try to return to the vertical, but will overshoot. Chances are it may topple over altogether. In that case it could be described as statically stable but dynamically unstable.
No doubt others will think of some better examples!
So the pendulum is statically stable, but its dynamic stability is roughly neutral. If some kind of damper is fitted, it will retain its static stability and gain some dynamic stability.
Now think of a pencil standing vertically upright on a flat, horizontal surface. When the top of it is displaced slightly, it will try to return to the vertical, but will overshoot. Chances are it may topple over altogether. In that case it could be described as statically stable but dynamically unstable.
No doubt others will think of some better examples!
