EC-135 T2+ Training Degrade Fault Message
Thread Starter
Join Date: Apr 2012
Location: Bush
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
EC-135 T2+ Training Degrade Fault Message
Hi just wondering if anyone out there has experienced an issue with their EC 135T2+ in the training mode. At the moment our pilots have been having the issue in the training mode. What is happening, is when the training switch isselected with both engines up and running, they attempt to simulate an engine failure by bringing one of the engines back to idle but at that very instance it is rejected and the engine reinstates to flight and the Degrade message appears on the number 1 engines CAD. This fault message appears only onthe Number 1 engines CAD, regardless of which engine you try to bring to idle when in the training mode.
Just hoping someone out there has had this happen to them and might be able to shed some light on our issue. Thanks in advance.
Interesting...................let us know what the Tech Rep sez.
He will probably want to know -
a) the procedure you are actually implementing
b) Pre or Post TU146
c) which version of the 20VE panel you have
d) DECU Software status
for a start.
He will probably want to know -
a) the procedure you are actually implementing
b) Pre or Post TU146
c) which version of the 20VE panel you have
d) DECU Software status
for a start.
