Emergency landing
Join Date: Feb 2008
Location: Manitoba Canada
Age: 72
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
.
This guy did both .... skids down on grass , then slid across the runway , then back to grass
Had a flameout while doing a maximum performance takeoff .... go to 5:00 in the video
https://www.youtube.com/watch?v=9ltxduwRp_g
This guy did both .... skids down on grass , then slid across the runway , then back to grass
Had a flameout while doing a maximum performance takeoff .... go to 5:00 in the video
https://www.youtube.com/watch?v=9ltxduwRp_g
Purveyor of Egg Liqueur to Lucifer
Have you read the comments on that video?
What sort of take off was that at 5:25?
Max performance take off you say … I say bollix.
If you're going to do one of those, you sit in the hover and check all is well before undertaking the exercise, not just hoof it all in from MPOG! No wonder it went Pete Tong!
Of course, someone is bound to pipe up now and say, 'Sid, we do things differently over here!'
Oh well, that may well be the case; which is ok if you want to hear of yet another 'brilliant pilot' piling in! But inevitably some would just put that down to bad luck !!!
Oh really
"Helicyclepilot,You did a great job landing, they don't glide long do they? "
"Awesome piloting! Split second decision making is the trademark of the pros."
"u are your own lifesaver. awesome job"
"Great job man !"
"Great recovery stan!"
"Awesome piloting! Split second decision making is the trademark of the pros."
"u are your own lifesaver. awesome job"
"Great job man !"
"Great recovery stan!"
Max performance take off you say … I say bollix.
If you're going to do one of those, you sit in the hover and check all is well before undertaking the exercise, not just hoof it all in from MPOG! No wonder it went Pete Tong!
Of course, someone is bound to pipe up now and say, 'Sid, we do things differently over here!'
Oh well, that may well be the case; which is ok if you want to hear of yet another 'brilliant pilot' piling in! But inevitably some would just put that down to bad luck !!!
Oh really
Purveyor of Egg Liqueur to Lucifer
On a more back to thread note:
I'm sure anyone that has visited the EOL area at Wallop would have had the 'little hop over the old track to Knock Wood experience'.
I'm sure anyone that has visited the EOL area at Wallop would have had the 'little hop over the old track to Knock Wood experience'.
Join Date: Sep 2003
Location: Germany
Age: 53
Posts: 668
Likes: 0
Received 0 Likes
on
0 Posts
But as noted....in helicopters the slower you are at touch down in both vertical and horizontal directions the better off you are.
Join Date: Feb 2008
Location: Manitoba Canada
Age: 72
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
What sort of take off was that at 5:25?
Max performance take off you say … I say bollix.
If you're going to do one of those, you sit in the hover and check all is well before undertaking the exercise, not just hoof it all in from MPOG! No wonder it went Pete Tong!
Max performance take off you say … I say bollix.
If you're going to do one of those, you sit in the hover and check all is well before undertaking the exercise, not just hoof it all in from MPOG! No wonder it went Pete Tong!
He owns all the land and farm equipment he flies over in the other videos and the long narrow path through the forest leads to the hangar where he built the helicopter . best wishes.
Purveyor of Egg Liqueur to Lucifer
Hover check ??? ... he had just landed 5 seconds earlier , everything was working fine
Yea, why bother with checks, just take up valuable time don't they
"Demonstration for a friend", that 'old gem' and of course; sorry, I forgot that if you own the land below you, it doesn't getcha
Purveyor of Egg Liqueur to Lucifer
Krypton john, you seem to have confused me with someone that cares about what matey boy gets up to.
As long as he doesn't ruin anyone else's life, crack on, I'll look forward to his own thread later.
As long as he doesn't ruin anyone else's life, crack on, I'll look forward to his own thread later.
Purveyor of Egg Liqueur to Lucifer
If you care to read my other post, I'll go with Shawn, however as previously mentioned, chances are you won't have much of a choice.
I do however care enough about the dark side of these threads where the actions of some are considered the norm, and those actions are only supported by the impressionable.
The real tale behind the video;
Full down auto from HV curve
I do however care enough about the dark side of these threads where the actions of some are considered the norm, and those actions are only supported by the impressionable.
The real tale behind the video;
Full down auto from HV curve
Last Veterans day ....November 11th, I was flying around and decided to go up to the airport. I landed and noticed a friend of mine watching. I decided to show him a very aggressive rate of climb...so I took off and pulled the collective like I had never before.
I am kicking myself as I let euphoria take over common sense. The helicopter was climbing like a homesick angel, when I noticed my rotor rpm's were declining. There isnt a torque meter...or a manifold pressure gauge since its a turbine...and its not necessary to pull a lot of collective...which I did anyway as I was caught up in my dumbass moment. I saw the rotor rpm's down...and dropped collective.
Unfortunately, this caused the turbine's rpm to surge....and it overshot the overspeed limit, shutting the turbine down......flameout! I immediately dropped all the collective and here I was at low airspeed, no more than 100 feet up....and dropping like a rock.
I lowered the nose trying to milk out as much energy as I could. The ground was rushing up...and my only possibility of saving this ship was to do a runon landing at around 40 mph. I landed straight with my flight path which started in the grass on the west side of the runway...then sliding on a diagonal across the asphalt runway...into the grass on the other side before stopping.
I held full collective on the whole ground run on to minimize my decceleration so as to help keep from flipping on my nose. It came to a stop...and I lowered the collective...got out and checked it over. I started the turbine up and all was fine. It was getting dark so I left it in a hangar...checked it over the next morning and flew it back to my shop. I just happened to have had my skid mounted video on...and it was very clear.
If you watch it...the video starts at my shop where I keep the helicopter...then you can see me flying around a farm tractor. I land at the local airport...and at 5:28 I lift off and start doing something I had never done...over torqued the collective.
At 5:42 in the video, you can see a left yaw when my turbine flamed out...and the rest is history. Time came to a crawl. I let euphoria get me into this situation....and I was given the chance to redeem myself by doing what was necessary to hit the tiny keyhole that would save my helicopter.
I have been told that this is probably one of a few if not the only actual video of a real flameout in the HV curve and able to fly it away afterwards.
I am just a fledgling helicopter pilot.....and I learned more in that 10 seconds than any instructor could bark in my ear in a year.
I had the dreaded 3 C's on this flight. Crowd...one is enough.....Camera.....yep ..it was on....confidence....you bet....
I am kicking myself as I let euphoria take over common sense. The helicopter was climbing like a homesick angel, when I noticed my rotor rpm's were declining. There isnt a torque meter...or a manifold pressure gauge since its a turbine...and its not necessary to pull a lot of collective...which I did anyway as I was caught up in my dumbass moment. I saw the rotor rpm's down...and dropped collective.
Unfortunately, this caused the turbine's rpm to surge....and it overshot the overspeed limit, shutting the turbine down......flameout! I immediately dropped all the collective and here I was at low airspeed, no more than 100 feet up....and dropping like a rock.
I lowered the nose trying to milk out as much energy as I could. The ground was rushing up...and my only possibility of saving this ship was to do a runon landing at around 40 mph. I landed straight with my flight path which started in the grass on the west side of the runway...then sliding on a diagonal across the asphalt runway...into the grass on the other side before stopping.
I held full collective on the whole ground run on to minimize my decceleration so as to help keep from flipping on my nose. It came to a stop...and I lowered the collective...got out and checked it over. I started the turbine up and all was fine. It was getting dark so I left it in a hangar...checked it over the next morning and flew it back to my shop. I just happened to have had my skid mounted video on...and it was very clear.
If you watch it...the video starts at my shop where I keep the helicopter...then you can see me flying around a farm tractor. I land at the local airport...and at 5:28 I lift off and start doing something I had never done...over torqued the collective.
At 5:42 in the video, you can see a left yaw when my turbine flamed out...and the rest is history. Time came to a crawl. I let euphoria get me into this situation....and I was given the chance to redeem myself by doing what was necessary to hit the tiny keyhole that would save my helicopter.
I have been told that this is probably one of a few if not the only actual video of a real flameout in the HV curve and able to fly it away afterwards.
I am just a fledgling helicopter pilot.....and I learned more in that 10 seconds than any instructor could bark in my ear in a year.
I had the dreaded 3 C's on this flight. Crowd...one is enough.....Camera.....yep ..it was on....confidence....you bet....
Thanks for all the comments. I beat myself about this, and learned a lot. I have an excellent helicopter that I almost destroyed by asking it to do more than it was designed for.
I had a chance to save it though, and I did. I am a fledgling helicopter pilot but having this happen on Veterans day made me feel like maybe I am more of a helicopter pilot now, at least a veteran of having a real auto at a most serious time.
I have over 800 hours in gyroplanes and have had 18 forced landings in them without a scratch. Helicopters are a different animal, and I will be a better pilot by keeping myself at flight speeds and altitudes where another auto will be a lot easier to handle.
I had a chance to save it though, and I did. I am a fledgling helicopter pilot but having this happen on Veterans day made me feel like maybe I am more of a helicopter pilot now, at least a veteran of having a real auto at a most serious time.
I have over 800 hours in gyroplanes and have had 18 forced landings in them without a scratch. Helicopters are a different animal, and I will be a better pilot by keeping myself at flight speeds and altitudes where another auto will be a lot easier to handle.
Join Date: Jun 2003
Location: Off the Planet
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
NTSB Identification: WPR16LA055
Scheduled 14 CFR Part 135: Air Taxi & Commuter
Accident occurred Sunday, January 17, 2016 in Hanalei, HI
Aircraft: AIRBUS EC130, registration: N11VQ
Injuries: 4 Serious, 3 Minor.
This is preliminary information, subject to change, and may contain errors. Any errors in this report will be corrected when the final report has been completed. NTSB investigators may not have traveled in support of this investigation and used data provided by various sources to prepare this aircraft accident report.
On January 17, 2016, about 1430 Hawaii standard time, an Airbus EC130 T2, N11VQ, landed hard on a beach 2 miles west of Hanalei on the Hawaiian island of Kauai after a reported loss of engine power. The commercial pilot and 2 passengers sustained minor injuries, and 4 passengers were seriously injured. The helicopter sustained substantial damage to the tailboom and airframe. The helicopter was registered to Nevada Helicopter Leasing LLC, operated by Blue Hawaiian Helicopters under the provisions of 14 Code of Federal Regulations, Part 135, and was conducting an air tour flight at the time of the accident. Visual meteorological conditions prevailed for the flight, and a company visual flight plan had been filed. The local flight originated in Lihue at 1406.
The pilot reported that he was about 1/4 mile off shore northwest of Honopu Sea Arch at 1,300 feet mean sea level (msl) when he heard the low rotor rpm aural warning horn. He immediately entered an autorotation and turned towards the beach. He transmitted over the radio that he had an engine failure. As he approached the shoreline he made a right turn to the south and landed hard on the beach. He applied the rotor brake to slow the rotor, and at that time he noted that the engine was not running. The passengers began to exit and he pulled the engine fuel cutoff.
Scheduled 14 CFR Part 135: Air Taxi & Commuter
Accident occurred Sunday, January 17, 2016 in Hanalei, HI
Aircraft: AIRBUS EC130, registration: N11VQ
Injuries: 4 Serious, 3 Minor.
This is preliminary information, subject to change, and may contain errors. Any errors in this report will be corrected when the final report has been completed. NTSB investigators may not have traveled in support of this investigation and used data provided by various sources to prepare this aircraft accident report.
On January 17, 2016, about 1430 Hawaii standard time, an Airbus EC130 T2, N11VQ, landed hard on a beach 2 miles west of Hanalei on the Hawaiian island of Kauai after a reported loss of engine power. The commercial pilot and 2 passengers sustained minor injuries, and 4 passengers were seriously injured. The helicopter sustained substantial damage to the tailboom and airframe. The helicopter was registered to Nevada Helicopter Leasing LLC, operated by Blue Hawaiian Helicopters under the provisions of 14 Code of Federal Regulations, Part 135, and was conducting an air tour flight at the time of the accident. Visual meteorological conditions prevailed for the flight, and a company visual flight plan had been filed. The local flight originated in Lihue at 1406.
The pilot reported that he was about 1/4 mile off shore northwest of Honopu Sea Arch at 1,300 feet mean sea level (msl) when he heard the low rotor rpm aural warning horn. He immediately entered an autorotation and turned towards the beach. He transmitted over the radio that he had an engine failure. As he approached the shoreline he made a right turn to the south and landed hard on the beach. He applied the rotor brake to slow the rotor, and at that time he noted that the engine was not running. The passengers began to exit and he pulled the engine fuel cutoff.
Join Date: Nov 2008
Location: UK
Age: 66
Posts: 919
Likes: 0
Received 0 Likes
on
0 Posts
Krypton,
How about a throttle "chop" from full RRPM before lifting? If the idle stop screw was set too low, this may have revealed it.
What check would have identified this particular issue?
Join Date: Feb 2008
Location: Manitoba Canada
Age: 72
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
SilsoeSid '5 seconds earlier everything was fine', however 5 seconds later it wasn't
Yea, why bother with checks, just take up valuable time don't they
Yea, why bother with checks, just take up valuable time don't they
chopjock How about a throttle "chop" from full RRPM before lifting? If the idle stop screw was set too low, this may have revealed it.
The Helicycle uses a belt drive to the 90* gearbox same as R22 & H269
Helicycle belt tension is carefully set so the belts will slip in an overtorque so as not to exceed transmission limitations.
The Helicycle turbine is also set up to prevent overspeed by shutting the fuel to idle via a different control than a throttle chop.
It was this idle screw that was set too low and caused the flameout.
And the only way to find that out was to have an actual overtorque and overspeed. It would not show up in ground checks.
Got to give the guy credit , he built the helicopter himself and it is one of the smoothest machines in the world vibration wise , plus he had a flameout in the dead mans curve and managed to land it without a scratch and flew it home afterwards.
Join Date: Nov 2008
Location: UK
Age: 66
Posts: 919
Likes: 0
Received 0 Likes
on
0 Posts
Arnie
But if "over torque" only causes the belts to slip, then one could overspeed it on the ground checks to confirm fuel shut off to idle is set correctly, right?
Helicycle belt tension is carefully set so the belts will slip in an overtorque so as not to exceed transmission limitations.
The Helicycle turbine is also set up to prevent overspeed by shutting the fuel to idle via a different control than a throttle chop.
And the only way to find that out was to have an actual overtorque and overspeed. It would not show up in ground checks.
Purveyor of Egg Liqueur to Lucifer
Arnie, two things;
1. Does the Helicylce have a published flight manual or POH? Is there a Performance section/chapter in this POH? Is there an actual HV Diagram?
2. If there is, why does this guy always seem to fly in the right hand part of it?
1. Does the Helicylce have a published flight manual or POH? Is there a Performance section/chapter in this POH? Is there an actual HV Diagram?
2. If there is, why does this guy always seem to fly in the right hand part of it?
Join Date: Feb 2008
Location: Manitoba Canada
Age: 72
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
chopjock But if "over torque" only causes the belts to slip, then one could overspeed it on the ground checks to confirm fuel shut off to idle is set correctly, right?
Join Date: Feb 2008
Location: Manitoba Canada
Age: 72
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
SilsoeSid I dont have time to watch all the videos right now .... the guy is not a crazy cowboy flier , he even cut the path thru the trees in case he had to auto when leaving his yard.
The low mounted camera maybe exaggerates his speed a bit
On that subject , it is an un-stabilized camera stuck to the underbelly ... notice how smooth the machine is ... hard to spot any vibrations at all .
Helicycle has a heavy rotor ala B206 .. lots of inertia for auto.
The low mounted camera maybe exaggerates his speed a bit
On that subject , it is an un-stabilized camera stuck to the underbelly ... notice how smooth the machine is ... hard to spot any vibrations at all .
Helicycle has a heavy rotor ala B206 .. lots of inertia for auto.
Join Date: Jun 2010
Location: Germany
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
This from you:
and this from the pilot himself:
At least at this very flight, he really was a crazy cowboy. And it was of course no "max pwr t/o".
Could call himself lucky to still being able to think about it...
And I will try to not make this error by myself. Although I would not promise it.
Thracian
not a crazy cowboy flier
maximum performance takeoff
like I had never before
let euphoria take over common sense
something I had never done...over torqued the collective
Crowd...one is enough.....Camera.....yep ..it was on....confidence....you bet....
Could call himself lucky to still being able to think about it...
And I will try to not make this error by myself. Although I would not promise it.
Thracian
I don't see low flying as being in the HV curve and see no problem with his flying ..( other than an over torque if that's what happened )
Also how many people do a power check on every take off even if it's effectively a touch and go ? I think he did a pretty good job !!
Also how many people do a power check on every take off even if it's effectively a touch and go ? I think he did a pretty good job !!
Purveyor of Egg Liqueur to Lucifer
Nigelh;
I don't see low flying as being in the HV curve and see no problem with his flying ..( other than an over torque if that's what happened )
Also how many people do a power check on every take off even if it's effectively a touch and go ? I think he did a pretty good job !!
I don't see low flying as being in the HV curve and see no problem with his flying ..( other than an over torque if that's what happened )
Also how many people do a power check on every take off even if it's effectively a touch and go ? I think he did a pretty good job !!
https://www.airbushelicopters.com/we...S-00-R0-EN.pdf
I gather you fly/own the 500 and 350, so needless to say you must be familiar with these;
… and for the R22 flyers out there;
So, do you still think low flying is not in the curve?
As for the checks on take off, like clearing turns, maybe for some of us it is habitual to check all is well when lifting into the hover.