Hughes vs Gazelle
ex mil 341 or a civil 341/2 ?
former cheaper to run latter cost a fortune in parts unless a non EASA one
Have had both personally i would go with a 500D if you can find one then a stretched 342, then a tie between 500E and 341.
341 Against a C model 500
341 faster ( 125 ish ), carries more weight ( full fuel 4 pax ), 40 gal of fuel an hour, no leg room for pax in back
369C at best 120 kts carries less weight ( full fuel have to watch the pax weight ) 20 gal fuel an hour no head room for pax in the back
former cheaper to run latter cost a fortune in parts unless a non EASA one
Have had both personally i would go with a 500D if you can find one then a stretched 342, then a tie between 500E and 341.
341 Against a C model 500
341 faster ( 125 ish ), carries more weight ( full fuel 4 pax ), 40 gal of fuel an hour, no leg room for pax in back
369C at best 120 kts carries less weight ( full fuel have to watch the pax weight ) 20 gal fuel an hour no head room for pax in the back
Join Date: Sep 2007
Location: On the Rump of Pendle Hill Lancashi
Posts: 614
Likes: 0
Received 0 Likes
on
0 Posts
Performance, Power to spare and dashing good looks, the Gazzer will win every time, however a little more thirsty , and servicing a about **% higher than the 500.
Gazelle for me, if deep enough pockets..!
Gazelle for me, if deep enough pockets..!
This tread has started well but is becoming less and less interesting,
so I looked online: History
a bit more information there about the gazelle heritage (development of the platform: Alouette II and III)
the published reference agrees on 264Km/h (140Knots) cruise and 310Km/h (170Knots) VNE
There is somewhere on YouTube a Gazelle doing 160Knots as I remember.
I think the interesting point is that both the gazelle and the Hugues500 are speed/ maneuverability leaders. Design wise it was obtain in different ways:
1_ the gazelle on one side, low parasite drag + fenestron + loads of power.
2_ The hugues500, a 5 blade rotor that enables less rotor diameter (faster NR), thus delaying advancing compressibility, retreating stall.
Am I on the right track?
so I looked online: History
a bit more information there about the gazelle heritage (development of the platform: Alouette II and III)
the published reference agrees on 264Km/h (140Knots) cruise and 310Km/h (170Knots) VNE
There is somewhere on YouTube a Gazelle doing 160Knots as I remember.
I think the interesting point is that both the gazelle and the Hugues500 are speed/ maneuverability leaders. Design wise it was obtain in different ways:
1_ the gazelle on one side, low parasite drag + fenestron + loads of power.
2_ The hugues500, a 5 blade rotor that enables less rotor diameter (faster NR), thus delaying advancing compressibility, retreating stall.
Am I on the right track?
311
Well according to my log book I have flown 17 different 341's and 342 's the best one would get to 130 its straight and level and these were 342's
A 341 at IPS is 120 kts, at MPS it will struggle to get to 130 kts
At 81.3psi ( max cont) a 500D is around 135 to 140 kts
However all this depends upon blade track etc etc
Most 341's are happy at around 125 its as are 500's Much past that and you can feel the power through the airframe and they don't half drink the fuel.
If you have a 341 that will do 140 kts straight and level you have a very good one so best keeping it
Well according to my log book I have flown 17 different 341's and 342 's the best one would get to 130 its straight and level and these were 342's
A 341 at IPS is 120 kts, at MPS it will struggle to get to 130 kts
At 81.3psi ( max cont) a 500D is around 135 to 140 kts
However all this depends upon blade track etc etc
Most 341's are happy at around 125 its as are 500's Much past that and you can feel the power through the airframe and they don't half drink the fuel.
If you have a 341 that will do 140 kts straight and level you have a very good one so best keeping it
The RAF ones at Shawbury were good for 125 at IPS and 135 to 140 at MPS. The Army ones at Wallop were heavier and slower.
I've not got vast experience on the 500, but quite a lot on the Gazelle. My angle is the they're similar in terms of top speed but the Gazelle acheives it in a more comfortable manner. I think the lightness of the hydraulic-assistance and for me, the better balanced controls, gives the Gazelle a significant edge - but at a price!
But I'm biased, I learnt to fly on Gazelle.
JJ
But I'm biased, I learnt to fly on Gazelle.
JJ
Join Date: Mar 2004
Location: hayling island
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Comparing helicopters is very difficult, due to many factors.
Basically it comes down to personal preference, they all do some aspects of flying quite well, but there is no such thing as the perfect helicopter? Yet anyhow in my humble opinion.
Basically it comes down to personal preference, they all do some aspects of flying quite well, but there is no such thing as the perfect helicopter? Yet anyhow in my humble opinion.
Our very own doyen of all things rotary, Dennis Kenyon, has reviewed the Gazza and knows a little bit more about MD500 than most....
See p25:
http://issuu.com/loop_digital_media/...rch_2011_issue
DK, are you there?
See p25:
http://issuu.com/loop_digital_media/...rch_2011_issue
DK, are you there?
Like Timprice says, it's a personal choice. If you were going to use it as a working helicopter then the specs come into play. I personally like the look, sound and inside layout of the Gazelle and would take it any day over the 500. It might need a bit more elbow grease...but who said flying helicopters was a clean job...
Join Date: Nov 2002
Location: Ross-on-Wye
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
MB369
Hi KJ ... yup I'm on frequency. I suppose IF we are making comparisons, one needs to compare the best of both types. Last September, I displayed MD's 530F model at the AAD, AFB Waterkloof near Pretoria. The C-30 630 SHP was giving me 'non-zoom' ROC of almost 4000 fpm! TAS at 5000 feet. (a couple of hundred feet AGL at Waterkloof) was 180 mph. I can't see the Gazza beating that my much if at all!
Not knocking the superb Gazelle but as has already been said above, I've fifty times more time on the MD so she has to be my all time favourite. I'm with Tim P on this one ... tis horses for you know what. Best wishes to all. Dennis Kenyon.
Not knocking the superb Gazelle but as has already been said above, I've fifty times more time on the MD so she has to be my all time favourite. I'm with Tim P on this one ... tis horses for you know what. Best wishes to all. Dennis Kenyon.
Originally Posted by Dennis Kenyon
I suppose IF we are making comparisons, one needs to compare the best of both types.
I can't see the Gazza beating that my much if at all!
A quick search on GlobalPlaneSearch.com shows 7 used Gazelles between USD 250k to 650k (year 1975 - 1980 mostly). Whereby a used MD530F would set you back at least USD 1.5m for an early model (around 1987).
Join Date: Dec 2011
Location: Oregon, US
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
At Sea level a 530F is not much if any faster than a D in cruise. The round nose is better aerodynamically and the extra 200 pounds or so makes a big difference.
My last cross country in a 500D I cruised in the high 130knot range at 70PSI all day long (with frequent fuel stops). If I wanted to push it to redline I believe I could have hit 156knot VNE in level flight
My last cross country in a 500D I cruised in the high 130knot range at 70PSI all day long (with frequent fuel stops). If I wanted to push it to redline I believe I could have hit 156knot VNE in level flight
A different comparison.
Looking at the Gazelle crash in Longford thread.
If he had been flying a 500 with its smaller diameter MR he might have
Got away with it !
R
Looking at the Gazelle crash in Longford thread.
If he had been flying a 500 with its smaller diameter MR he might have
Got away with it !
R