B206 stick "as if one stirs a bucket of concrete"
Join Date: Mar 2005
Location: Holly Beach, Louisiana
Posts: 916
Likes: 0
Received 0 Likes
on
0 Posts
I suppose we have to declare the Rotor Blades have to be turning at near Normal RPM as well....to keep some nit pickers happy. They will have to decide if that is due to the Engine running or if the aircraft is in auto-rotation.
Join Date: Apr 2004
Location: canada
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
with friction off it should be light, if not, you could even disconnect at the swashplate and feel the range of motion feel , I have found overspray on balls at the monkey knuckle or if it doesnt have duals, over on the part where the cyclic should go into, there is a piece with 2 balls in that that gets gummed up or has overspray on it
if you want to test hydraulics, without the engine running, you can take the hydro pack off and run it with a drill spinning a 1/4" drive bit.
if you want to test hydraulics, without the engine running, you can take the hydro pack off and run it with a drill spinning a 1/4" drive bit.