Bell 206L down Australia
Thread Starter
Join Date: Jul 2013
Location: Earth
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Bell 206L down Australia
MI Helicopters had a mishap around the Taroom area a few days ago.
Hope it wasn't Capt Hollywood, i think he flies for these guys.
From the ATSB site.
While conducting sling load operations, the load at the end of the long line became tangled. The pilot attempted to land the helicopter, however when at about 10 ft above ground level, the line pulled tight. The pilot was unable to release the line, and the helicopter collided with terrain, resulting in substantial damage. The pilot received minor injuries.
Hope it wasn't Capt Hollywood, i think he flies for these guys.
From the ATSB site.
While conducting sling load operations, the load at the end of the long line became tangled. The pilot attempted to land the helicopter, however when at about 10 ft above ground level, the line pulled tight. The pilot was unable to release the line, and the helicopter collided with terrain, resulting in substantial damage. The pilot received minor injuries.
Last edited by Vladimer; 26th Jun 2014 at 09:54.
ATSB link here:
Aircraft details
Aircraft manufacturer: Bell Helicopter Co
Aircraft model: 206L-3
Aircraft registration: VH-NKW
Serial number: 51463
Type of operation: Aerial Work
Sector: Helicopter
Damage to aircraft: Substantial
Departure point: Scotia 3D Seismic Camp, Qld
Aircraft details
Aircraft manufacturer: Bell Helicopter Co
Aircraft model: 206L-3
Aircraft registration: VH-NKW
Serial number: 51463
Type of operation: Aerial Work
Sector: Helicopter
Damage to aircraft: Substantial
Departure point: Scotia 3D Seismic Camp, Qld
