Go Back  PPRuNe Forums > Aircrew Forums > Rotorheads
Reload this Page >

Not for any amount of money (video)

Rotorheads A haven for helicopter professionals to discuss the things that affect them

Not for any amount of money (video)

Old 2nd Apr 2006, 18:34
  #1 (permalink)  
Thread Starter
 
Join Date: Feb 2004
Location: Just left of the centre line
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts
Not for any amount of money (video)

Would i strap my butt into this and fly

http://video.google.com/videoplay?do...copter&pl=true
as355f1 is offline  
Old 2nd Apr 2006, 18:58
  #2 (permalink)  
 
Join Date: Dec 2004
Location: canada
Posts: 263
Received 18 Likes on 7 Posts
excellent vid to chuckle at...
twinstar_ca is offline  
Old 2nd Apr 2006, 19:10
  #3 (permalink)  
 
Join Date: Mar 2006
Location: Land of damp and drizzle
Posts: 608
Likes: 0
Received 0 Likes on 0 Posts
hang on, where's the tail rotor on that beastie?
Pandalet is offline  
Old 2nd Apr 2006, 19:25
  #4 (permalink)  
 
Join Date: Apr 1999
Location: vocation
Age: 57
Posts: 202
Likes: 0
Received 0 Likes on 0 Posts
I presume it was a tip jet rotor, like the Djinn.

What a great way to get to work....if it wasn't raining.
HOGE is offline  
Old 2nd Apr 2006, 20:16
  #5 (permalink)  
Gatvol
 
Join Date: Jun 2000
Location: KLAS/TIST/FAJS/KFAI
Posts: 4,195
Likes: 0
Received 0 Likes on 0 Posts
Sweeeeet...............I remember a couple of those things which are now in Museums. Some may be here if you visit the states. http://www.armyavnmuseum.org/index.html
The US Marine Corps had one also, very similar.
B Sousa is offline  
Old 2nd Apr 2006, 21:14
  #6 (permalink)  
Thread Starter
 
Join Date: Feb 2004
Location: Just left of the centre line
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts
The last time i have seen anything like that was outside asda, and i put 50p in it for my daughter to play on it
as355f1 is offline  
Old 2nd Apr 2006, 21:55
  #7 (permalink)  
6Z3
 
Join Date: Apr 2004
Location: God's Country
Posts: 646
Received 4 Likes on 2 Posts
Which ASDA?
6Z3 is offline  
Old 2nd Apr 2006, 22:08
  #8 (permalink)  
Thread Starter
 
Join Date: Feb 2004
Location: Just left of the centre line
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts
The one that has the kid's helicopter ride outside
as355f1 is offline  
Old 2nd Apr 2006, 23:52
  #9 (permalink)  
 
Join Date: Oct 1999
Location: Den Haag
Age: 57
Posts: 6,218
Received 317 Likes on 176 Posts
"I presume it was a tip jet rotor, like the Djinn."

Correct: "..it's only power coming from compressed air generated by the engine.."
212man is offline  
Old 2nd Apr 2006, 23:57
  #10 (permalink)  
TheFlyingSquirrel
Guest
 
Posts: n/a
Was that Nick Lappos ?
 
Old 3rd Apr 2006, 02:10
  #11 (permalink)  
 
Join Date: Apr 2003
Location: Vancouver, BC, Canada
Posts: 1,635
Likes: 0
Received 0 Likes on 0 Posts
Smile

Here's competition; http://www.unicopter.com/1009.html

It's packaged in a torpedo tube.
Dave_Jackson is offline  
Old 3rd Apr 2006, 21:52
  #12 (permalink)  
 
Join Date: Feb 2006
Location: Lincs UK, Tulsa Ok, USA
Age: 61
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
Thumbs up

Originally Posted by Pandalet
hang on, where's the tail rotor on that beastie?

The jet engine provides compressed air to the rotor tips, hence no torque or need for a tail rotor. I don't know for sure but I assume it also uses directional compressed air jets in the tail for yaw control.
wlynx is offline  
Old 4th Apr 2006, 00:45
  #13 (permalink)  
 
Join Date: Nov 2003
Posts: 185
Likes: 0
Received 0 Likes on 0 Posts

The Dornier 32 E/U was an ultra-light single seat helicopter designed by Dornier, which started flight testing at Oberpfaffenhofen on June 19, 1962. It was a collapsible helicopter with reaction drive which could be carried in a car trailer which also served as a take-off and landing platform. Stowed in a special transport box, the helicopter could be stored anywhere, ready for operation, and was easily carried by air, sea and land. The two-blade rotor made of light metal was driven by compressed air leaving through blade tip nozzles. The drive system of this reaction helicopter, free from anti-torque moment, consisted of a turbine-operated compressor made for easy handling in operation. The Do 32E was practically a precursor for the unmanned "Kiebitz" ("Pewit") rotor platform. The Do 32 U autostable, remotely controlled rotor platform was derived from the Do 32 single seat helicopter. This experimental unit was used from June 1966 for basic testing for the future tethered unmanned "Kiebitz" rotor platform.
Dornier built a total of three prototypes of the single-seat helicopter. Since the German Ministry of Defense (Bundesverteidigungsministerium) was in muliseater though, additional models were not completed.

The Dornier Do.32 was one of the first helicopters designed and built by the German helicopter industry after the war. It was a small, ultra-lightweight single-seater which could be carried in a container of modest size, measuring 3.8m long and less than 1m wide. The container was fitted with wheels, could be towed by an ordinary motor car, and also served as a take-off and landing platform. The mini helicopter could be assembled in just five minutes.


The Do.32 was powered by a 100shp BMW 6012 turbine which drove the rotor through a cold cycle. The prototype was tested on 29 June 1962 and completed the test programme in mid 1963, when the German company displayed a second model at the Paris Air Show. A few others were built but the two-seat derivative (with a 250shp turbine) offered to the German government was not adopted.
Information
Note: This information is for education purposes. Source of texts retained.


My own theory:

The yaw control is through the flow of air over rudder, as a conventional airplane.

In a hover, the exhaust from the turbine will provide that flow...just a theory.

cl12pv2s
cl12pv2s is offline  
Old 4th Apr 2006, 04:07
  #14 (permalink)  
 
Join Date: Nov 2001
Location: San Jose, CA
Posts: 116
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by as355f1
Would i strap my butt into this and fly
http://video.google.com/videoplay?do...copter&pl=true
I probably would, at least in a hover. I'd be wearing a really good helmet and a back brace, just as if riding a sport bike .
The US version was designed by Hiller, and they have a nice display of one "flying" via ceiling-mounted wires and also one that is still in the drop tank configuration.
I took a couple pictures at the Hiller museum in San Carlos, CA, USA in 2004:
http://blave.smugmug.com/gallery/153068/1/5676682
http://blave.smugmug.com/gallery/153068/1/5676683
http://blave.smugmug.com/gallery/153068/1/5676684
I thought I had some shots of the indoors displays mentioned above, but I guess I don't.
More info:
http://www.hiller.org/rotorcycle.shtml
enjoy,
Dave Blevins
blave is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.