Professional Pilot Training (includes ground studies) A forum for those on the steep path to that coveted professional licence. Whether studying for the written exams, training for the flight tests or building experience here's where you can hang out.

Balanced field/Balanced V1

Old 29th Jan 2010, 13:57
  #1 (permalink)  
Thread Starter
 
Join Date: Feb 2008
Location: Malta
Age: 38
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Balanced field/Balanced V1

Hi guys,

I've got my Performance ATPL exam next week; i've came accross a few questions which refer to a 'balanced field' and 'balanced v1', however the answers are rather vague and the notes (from Bristol g.s) are about as clear as mud on the subject.

I know that in a balanced field situation TODA=ASDA; however i have no idea what the advantages are over a normal situation and what the differences are.

Any help would be appreciated; preferibly using a simple terminology!

Cheers
MalteseJambo is offline  
Old 29th Jan 2010, 14:51
  #2 (permalink)  
 
Join Date: Aug 2001
Location: Dorset
Posts: 775
Likes: 0
Received 0 Likes on 0 Posts
The term "balanced" is applied to two different, but related subjects in aircraft performane.

A BALANCED FIELD is one in which the ASDA = TODA. This means that the stopway length is equal to the clreaway length (because ASDA = TORA + STOPWAY and TODA = TORA + CLEARWAY).

But many fields are not actually balanced. If we use the two different values of ASDA and TODA in our performance calculations, we need to carry out two separate sets of calculations. One for the ASD and one for the TODR.

But if we pretend that the two lengths are equal, we need carry out only one set of calculations. To do this we simply take the shorter of the two lengths and pretend that it applies to both ASDA and TODA.

This will reduce the maximum field limited take-off mass, but it will make the calculations easier. Provided we are not close to the field limited TOM, this slight loss of field performance is not a problem.

The second subject is that of the BALANCED TAKE-OFF which is also called the BALANCED V1 TAKE-OFF.

This is a take-off in which the ASD = TODR. Note that these are not the distances availvable, but the distances that we expect to use.

When we are not field limited we have a range of possible values for V1. The minimum value (Vgo) is the minimum speed at which we can suffer a critical engine failure and still complete the take-off within the TODA. The maximum value (Vstop) is the maximum speed at which we can abort the take-off and stop within the ASDA.

Reducing V1 within this range increases TOD but decreases ASD. Increasing V1 within this range does the opposite, increasing ASD but decreasing TOD.

A BALANCED V1 take-off is one in which ASD = TOD. This means that the overall distance is minimised. So we have maximised our safety margins within the distances avaialble.

So for the purposes of your JAR ATPL PERFexam.

Doing balanced field calculations simplyies the calcualtions.
Doing a balanced V1 take-off maximises the safety margins for any given set of distances available.
Keith.Williams. is offline  
Old 25th Apr 2019, 21:13
  #3 (permalink)  
 
Join Date: Apr 2019
Location: Porto Alegre
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Hello everyone,

I'm aware this is a very old thread, but neverthless I have decided to bring it back alive because it pinpoints some doubts I have in regard to aircraft performance and declared distances.

Originally Posted by Keith.Williams.
If we use the two different values of ASDA and TODA in our performance calculations, we need to carry out two separate sets of calculations. One for the ASD and one for the TODR.
Which calculations we would have to do in such a situation? I know that in an unbalanced field one can use a stopway or clearway to raise the takeoff weight by using a higher or lower V1. Was this called ''different values''?

Last edited by MarceloJenisch; 25th Apr 2019 at 23:11.
MarceloJenisch is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.