C-130 AMP USAF Go-Around Question
Thread Starter
Join Date: Jan 2016
Location: NZ
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
C-130 AMP USAF Go-Around Question
Hello,
My name is Alex and I've got a very very specific question. With respect to the C-130 AMP System Requirements, that can be accessed through the following link:
http://fas.org/man/dod-101/sys/ac/docs/SRD_5_2.htm
Beneath the "Go-Around Function" section it states the "If Autothrottle is not implemented, the Go-Around function shall calculate and display 1.2 Vstall values to the aircrew".
Question: How was the 1.2Vs value calculated? I'm asking this because I can't connect the dots indirectly to FAR25 to determine why and how this requirement came about.
Any assistance will be much appreciated!
Many thanks in advance!
My name is Alex and I've got a very very specific question. With respect to the C-130 AMP System Requirements, that can be accessed through the following link:
http://fas.org/man/dod-101/sys/ac/docs/SRD_5_2.htm
Beneath the "Go-Around Function" section it states the "If Autothrottle is not implemented, the Go-Around function shall calculate and display 1.2 Vstall values to the aircrew".
Question: How was the 1.2Vs value calculated? I'm asking this because I can't connect the dots indirectly to FAR25 to determine why and how this requirement came about.
Any assistance will be much appreciated!
Many thanks in advance!