What's waking my desktop?
Thread Starter
Join Date: Aug 2007
Location: Brazil
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
What's waking my desktop?
Windows 8. I have to explicitly shut it down over night, as in hibernation it starts up again in the middle of the night, around 4 am. It's likely something wanting to update or do some maintenance, but the event logs don't reveal much, only that it started up, and when. I've tried turning off Avira automatic update, no joy.
What else can I do to find out what's going on? Or order it to stay in hibernation until I allow it to wake up?
What else can I do to find out what's going on? Or order it to stay in hibernation until I allow it to wake up?
Chief Tardis Technician
Join Date: Jan 2001
Location: Western Australia S31.715 E115.737
Age: 71
Posts: 554
Likes: 0
Received 0 Likes
on
0 Posts
It could be a switching pulse that is sent down the mains line to control lighting and other such stuff.
I had a puter the used to do the same thing about the same time (in Oz)
I had a puter the used to do the same thing about the same time (in Oz)
Join Date: Jul 2008
Location: uk
Posts: 894
Likes: 0
Received 0 Likes
on
0 Posts
My Dell has been doing that periodically for years.
Screen set to go off after five minutes inactivity but even lights up with no internet activity or anyone walking around. Most puzzling.
Screen set to go off after five minutes inactivity but even lights up with no internet activity or anyone walking around. Most puzzling.
Join Date: Feb 2009
Location: I.o.W
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Using the command line, try these to find out what's causing it:
powercfg -lastwake
That should tell you the source of the wake command.
powercfg -devicequery wake_armed
That one should tell you which devices are set to wake the system, similar to looking at the power options for every device in device manager.
powercfg -waketimers
That one will tell you which, if any, programs have wake timers configured.
Powercfg is a really useful cmd line tool in these situations. :-)
powercfg -lastwake
That should tell you the source of the wake command.
powercfg -devicequery wake_armed
That one should tell you which devices are set to wake the system, similar to looking at the power options for every device in device manager.
powercfg -waketimers
That one will tell you which, if any, programs have wake timers configured.
Powercfg is a really useful cmd line tool in these situations. :-)
Last edited by Tonka777; 8th May 2015 at 12:22.
Join Date: Jul 2010
Location: East sussex
Posts: 624
Likes: 0
Received 0 Likes
on
0 Posts
Vulcan.... If you have a laptop running W7 there is a setting, too late in the day now to expand. Briefly there is a setting to extend battery life reduced to 80% of charge.
Even after removing power lead from wall socket, the battery kicks in, mainly to drain battery power and recharge when back on mains power.
Even after removing power lead from wall socket, the battery kicks in, mainly to drain battery power and recharge when back on mains power.
Join Date: Aug 2002
Location: Earth
Posts: 3,663
Likes: 0
Received 0 Likes
on
0 Posts
Thread Starter
Join Date: Aug 2007
Location: Brazil
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Sorted, Tonka and mixture had it spot on. Can't imagine how anyone thought that was a good idea. Disabled the automatic turn-on and set it to a time when the puter is likely to be on.
Turning it off at the switch is what I wanted to avoid, as the inrush current affects filter capacitor life.
Turning it off at the switch is what I wanted to avoid, as the inrush current affects filter capacitor life.