Transition Level procedures LHR
Thread Starter
Join Date: Apr 2014
Location: New zealand
Age: 69
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Transition Level procedures LHR
When flying at say FL 80 and the controller says. " QNH is 1015, Descend to altitude
5,000 feet." Atis says transition level is FL 65. Do you set QNH immediately or do you set it passing FL65?
5,000 feet." Atis says transition level is FL 65. Do you set QNH immediately or do you set it passing FL65?
Join Date: Jul 2004
Location: On the wireless...
Posts: 1,901
Likes: 0
Received 0 Likes
on
0 Posts
From UK IAIP ENR 1.7-3 Para 5.3.1
When an aircraft is descended from a Flight Level to an Altitude preparatory to commencing approach for landing, ATC will pass the appropriate aerodrome QNH. On vacating the Flight Level, the pilot will change to the aerodrome QNH unless further Flight Level vacating reports have been requested by ATC, in which case, the aerodrome QNH will be set following the final Flight Level vacating report. Thereafter, the pilot will continue to fly on the aerodrome QNH until established on final approach.
When an aircraft is descended from a Flight Level to an Altitude preparatory to commencing approach for landing, ATC will pass the appropriate aerodrome QNH. On vacating the Flight Level, the pilot will change to the aerodrome QNH unless further Flight Level vacating reports have been requested by ATC, in which case, the aerodrome QNH will be set following the final Flight Level vacating report. Thereafter, the pilot will continue to fly on the aerodrome QNH until established on final approach.