SDM - Strip Display Management Test Advice
Join Date: Jan 2008
Location: here and there
Age: 42
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Join Date: Feb 2014
Location: Delcevo, Macedonia
Age: 32
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
its been years, and nobody, i mean nobody, tried to share SkyTest with us,,, great. now if somebody wants it, just should buy it. even though, i don't see any difference between skytest tests and IQ tests available on internet.
Join Date: Dec 2016
Location: cyprus
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Hey,
I have some questions about sdm test. There are 4 letters in the board so are those the ckeckpointsk how do you divide the aircrafts? Is it from their first checkpoint? How do you call a conflict either opposite or local? Do you just call them or their is anything else to do! Can you give me more directions?
ThAnk you
I have some questions about sdm test. There are 4 letters in the board so are those the ckeckpointsk how do you divide the aircrafts? Is it from their first checkpoint? How do you call a conflict either opposite or local? Do you just call them or their is anything else to do! Can you give me more directions?
ThAnk you
Join Date: Feb 2017
Location: Aberdeen
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
SDM is gone
The wiki page is pretty helpful:
DART (Dynamic ATC Radar Test). The DART test requires applicants to guide aircraft safely and efficiently through a system of checkpoints taking certain traffic constraints into consideration: The DART test requires applicants to guide 3 airplanes safely and efficiently through a system of 4 checkpoints (A,B,C,D), taking certain traffic constraints into consideration: All 3 planes are only allowed to fly in an altitude of either 100, 200, or 300. First without any other planes, then with air traffic of various other planes, one does not have control over (and which are normally always on collision course) and finally, one must additionally, simultaniously do some mental arithmetic: You are listening to a sequence of letters and digits. Whenever 2 digits are to be heard, one must add them together: For example, "AT3QSK7TBV8PH4" requires at first an addition of "3+7" and then as soon as you hear the digit 8, an addition of "7+8" and then "8+4"; so, in other words, to remember the last digit of the last addition and to add it with the next coming digit. The top priority is, of course, to avoid conflicts or collisions between the planes, but also to give possibly very few commands - as fewest as it is possible. Planes on the screen respond to the given instructions with a certain time delay.
Join Date: May 2017
Location: nicosia
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
SDM SOS
Hello everyone... i want your help about the "Strip Display Management Help"!!!!!!!!!!!!!!!!
i want someone to explain me how i remove the strips??? which time i check in order to remove a strip.... the logic of removing the strips.. pls SOS!!!!!
i want someone to explain me how i remove the strips??? which time i check in order to remove a strip.... the logic of removing the strips.. pls SOS!!!!!
Join Date: Apr 2017
Location: EH
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
First of all, try to relax. Second of all, discard that SkyTest or whatever it is you're using. You're getting stressed now for reasons that might not even be of any issue in the actual FEAST (everything will be clearly and well-explained to you), but which might actually cause you harm and impair your ability in the real test (approaching FEAST whilst being apprehensive from the get-go about stumbling across some SkyTest problem that might not even occur in FEAST is a no-no). A great example of why you shouldn't bother with any FEAST "preparatory" software...
Join Date: May 2017
Location: Germany
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
I wouldnt recommend using the SkyTest SDM either. Back when I applied for the DFS, I tried to use SkyTest to get familiar with the test. I didnt manage to find a single opposite conflict while practicing, so I was really stressed out going into the test.
When I was actually being tested, they had a 45 minute instruction for the test that made everything very clear. I found like 6-8 opposite conflicts during the actual test.
Also I had my FEAST II in April and I didnt have to do the SDM anymore. They now have something called Multipass that, if I recall correctly, completely replaced the SDM
When I was actually being tested, they had a 45 minute instruction for the test that made everything very clear. I found like 6-8 opposite conflicts during the actual test.
Also I had my FEAST II in April and I didnt have to do the SDM anymore. They now have something called Multipass that, if I recall correctly, completely replaced the SDM
