"Limited" in Jeppesen ILS chart

[ctemel]

Hello,

I can't find out what "limited" means exactly in Jeppesen ILS chart.
Full: all components operational
ALS out: approach lights system out
what does Limited mean: which component of ILS is out?

http://i.imgur.com/su6b8Er.png

Thanks.

[Lord Spandex Masher]

Somewhere in between full ALS and no ALS.

[ctemel]

thank you. :)

[mutt]

This is taken from the Jeppesen introduction booklet..
CAT I PRECISION AND APV
APPROACH MINIMUMS
An RVR of less than 750m may be used under the
conditions a. to d. shown below (Full column). Otherwise
the RVR is limited to 750m or above (Limited
column).
a. CAT I operations to runways with FALS and TDZ
and CL and with decision height of 200ft or
b. CAT I operations to runways with FALS but without
TDZ and/or CL when using an approved
HUDLS or an equivalent approved system or
c. CAT I operations to runways with FALS but without
TDZ and/or CL when conducting a coupled
or flight-director-flown approach to a decision
height not less than 200ft or
d. APV to runways with FALS and TDZ and CL
when using an approved HUD, but not below
RVR 600m.