PDA

View Full Version : Next G between Darwin and Adelaide


sprocket check
23rd Aug 2012, 08:23
Just wanting to find out what the coverage is like at say 7500 along the highway. The Telstra coverage map is only really relevant on the ground.

Thanks
sc

harrop
23rd Aug 2012, 09:26
Have done DN - TN - TNK - AS a few times at 9'000 - 10'000 and always had around 1-2 bars of coverage with NG.

AussieNick
23rd Aug 2012, 12:08
Last run from DN - TN - TNK - AS I did i was in coverage 90% of the way, worst was between TN and TNK

compressor stall
23rd Aug 2012, 12:47
Pretty good at 10K. Apparently.

nitpicker330
23rd Aug 2012, 13:24
Works at FL 390 over DN TN AS BH too :ok:

UnderneathTheRadar
23rd Aug 2012, 22:45
Does anyone know about a mine/railway strip at a place called Wirrida - about 100km south of Coober Pedy?

I have to do a job there and Google shows an airstrip right at the railway line where I need to be.

Size/owner/permissions/surface - etc?

Elfatness
24th Aug 2012, 01:43
Did a quick google and all I could find was:

Wirrida Siding Airport

05/23 is 3758 ft (1145 m) long

No description on surface though!

Hope it helps a little, there isn't a lot of info on it!

sprocket check
24th Aug 2012, 07:20
Thank you for the responses, greatly appreciated.

Sc

compressor stall
24th Aug 2012, 07:26
Arrium mining have a mine under construction about 100kms south of Coober Pedy - i drove through there the day before yesterday. :)

It all looked fairly new, the ore deposit must spend the road as they are installing three underpasses on the Stuart Highway, the earthworks are done but not yet sealed.

Can't comment on the strip, but the above might point you in the right direction.

compressor stall
24th Aug 2012, 07:28
Works at FL 390 over DN TN AS BH too


I usually use the Iridium at FL410 around there. Much easier through the headset. :p

Old Akro
24th Aug 2012, 07:48
How are you connecting the iridium to the headset?

gerry111
24th Aug 2012, 08:03
UTR, Wirrida rail siding is where the line heads East from the North South railway to the OZ Minerals mine at Prominent Hill. That's about 130km SE of Coober Pedy. There is a strip at Prominent Hill for fly in/out miners but PPR is required by Ad Manager. Refer YPMH, ERSA.

compressor stall
24th Aug 2012, 08:21
That's up to those funny electronics engineers. I just dial the number on the overhead keypad and then push the appropriate button on the ACP on the pedestal and talk . :cool:

NGsim
24th Aug 2012, 08:54
Haha is anyone up the front still turning their phone off these days?!!! I'm certainly not having a crack as I sure as hell do up in the flights levels!!

Mimpe
26th Aug 2012, 11:15
2 years ago it was fine most of the the time Alice to Katherine.
Why you'd want it I'm not sure.

sprocket check
28th Aug 2012, 08:04
It's for uploading of telemetry data. Too costly for satellite.