PDA

View Full Version : S-I LOC


newifr
11th Jun 2012, 08:44
Hi

Just looking at the PER Notam's and it has.

ILS or LOC Rwy 21 S-I LOC/DME MINIMA 550(507-2.0)


Could somebody please explain what the S-I stands for please.

newifr

tmpffisch
11th Jun 2012, 09:06
Straight in (as opposed to circling)

newifr
12th Jun 2012, 05:34
tmpffisch

Thanks for the info.

new

Eastmoore
15th Jun 2012, 00:13
What is the reason for this NOTAM.

BNE, PER , I have seen so far

Capt Claret
15th Jun 2012, 01:01
Same, same at CNS too.

alphacentauri
15th Jun 2012, 01:21
Are you guys referring to the NOTAM's that amend the visibility for all LOC procedures?

Eastmoore
15th Jun 2012, 01:38
Aip dep and apch (dap) east ybbn amd
ils or loc rwy 01 s-i loc/dme minima 560(547-2.2)
ils-z or loc-z rwy 19 effective 28jun12 s-i loc/dme minima
410(397-1.3)
ils-y or loc-y rwy 19 effective 28jun12 s-i loc/dme minima
410(397-1.3)
from 06 070431 to per

alphacentauri
15th Jun 2012, 03:28
You'll note its for the 28JUN cycle. There has recently been a change in the way visibility for LOC procedures can be calculated, and as such the change has been implemented across the board for all LOC procedures.

In short you can include the length of HIAL in the calculation. Thus the vis can be reduced by the length of HIAL available.