Pin/socket manual

[419]

Many years ago I had a manual that enabled you find the part numbers of connector contacts by using the colour code on the contacts.
I think that it was called "the link" or "link manual".

Would anyone know if this is still available and where it can be obtained from.
I've tried on google but haven't been unable to find anything so it may no longer be in production, or it could be under a different name.

Thanks for any advice

[cedgz]

previous post didn't pass
so here's the link again if you're looking for that

Daniels Manufacturing Corporation (http://www.dmctools.com/store/browser.asp)

[cedgz]

Hello,

we have a board of DMC that gives you pin/socket for basic plug/receptacle pn's
actually never used it, i only use a/c docs
maybe this can help you

Daniels Manufacturing Corporation (http://www.dmctools.com/store/browser.asp)

[Kiwiconehead]

There is a cross reference tool on the Daniels website

Also can download the manual I think.

Daniels Manufacturing Corporation (http://www.dmctools.com/store/browser.asp)

[419]

Thanks for the replies and links.
I found the Pt No for the socket I was after by using the DMC website.

I will keep looking to see if I can find a hard copy of the manual that I'm after as a few of the places I work have very limited internet access so I may not be able to get back on to the DMC site in future.

[cedgz]

Hello 419,

disregard the pm i send you, here's something way better.

http://www.dmctools.com/_pdf/Catalogs/ConnectorToolingGuide.pdf

this link is on the bottom of their homepage, and at least you can print it, you get everything. plug to pin/socket pn's. gage,tooling pn, everything

[no-hoper]

Merci beaucoup cedgz !

[cedgz]

avec grand plaisir NO-HOPER

[419]

Many thanks for that cedgz.:ok:

I'll print it ot when I get access to a good colour printer.