PDA

View Full Version : Ths trim setting airbus


Captain_BH
27th Jul 2011, 18:14
hi guys,

A320,

Where can I get the THS trim setting ie (.XXUP, DN) from other than the load and trim sheet, i tried to look in fcoms but i found nothing any idea ?

thanks

FLEXPWR
28th Jul 2011, 02:51
Could you refine your question?

Is it the trim setting displayed you're looking for, I.e. from the FLT CTL page, or where you can find other means of calculating CG?

Flex

capt. solipsist
28th Jul 2011, 02:52
If you mean other than on the trim wheel: A320 Weight & Balance Manual 1.00.09 p1 :ok:

DutchOne
30th Jul 2011, 10:41
Keep it in the green :E

Microburst2002
30th Jul 2011, 16:22
ECAM FCTL page

Captain_BH
6th Aug 2011, 11:30
sorry guys,

I mean calculating the trim setting.. for the PERF page entry in MCDU..

where can i get that from thanks!!

Microburst2002
7th Aug 2011, 09:32
In the thrust lever and in the checklist you have the scale with CGs and THS setting.
Is that what you mean?

Or you want a load index to %MAC CG table?

Captain_BH
11th Aug 2011, 05:10
affirm im looking for table shows the trim%
for example 34.5 = 1.2DN .. I need the a table or the way to get the second information. 1.2DN

a source other than the Airbus trim and Load Sheet coz we dont use it in our company and the figure on the trim wheel..

Microburst2002
11th Aug 2011, 08:06
I'm affraid that I don't really understand exactly what you need.

There is a relationship between the take off CG and the take off pitch trim setting. This relationship is constant for a given airplane (there can be differences between models). This relationship is given in the THS wheel itself and in the normal checklist. It is also shown in the balance part of the load sheet.

If your airplane does not use the checklist, nor the THS scale, then they must have manual load and balance sheet. If that is not what you are looking for, there is nothing else I can do...

bo-peep
11th Aug 2011, 08:10
in our airline, its in the qrh, on the back cover under the normal checklist

capt. solipsist
11th Aug 2011, 15:29
a source other than the Airbus trim and Load Sheet coz we dont use it in our company and the figure on the trim wheel..

I say again: A320 Weight & Balance Manual 1.00.09 p1 :cool:

Captain_BH
11th Aug 2011, 22:32
in our airline, its in the qrh, on the back cover under the normal checklist

We used to have it too, but not anymore!


I say again: A320 Weight & Balance Manual 1.00.09 p1


Its exactly what I am looking for but what is there is not for all aircrafts registerations! and unfortunetly the document is not approved by our company..

im wondering if its somewhere in fcoms!!

Any way thank you very much guys so kind of you:ok:

Microburst2002
12th Aug 2011, 06:58
What do you use when there is no computer load sheet available?
Don't you have load and balance sheets? There you can find it