Aais/awib Qnh

[allthecoolnamesarego]

Hi all,

I was hoping someone might be able to help. I can't access the AIP on line (only get the index pages???) and would like to update my summary notes.

If any one has the latest version of this paragraph, I would greatly appreciate it

Many thanks

Cool names

Shaded background minima may be reduced by 100FT whenever an actual aerodrome QNH is set. Approved sources of actual QNH are ATC, ATIS, AWIS and CASA-approved meteorological observers. An actual aerodrome QNH obtained from an approved source is valid for a period of 15 minutes from the time of receipt

[equal]

it's in enr 1.5 para 5.3

or 8th page down in the ENR toc.

[kingRB]

not sure why you cant view anything more than the index :confused:


http://www.airservicesaustralia.com.au/publications/current/aip/enr/1_5_7-39.pdf

ENR 1.5 5.3.2

Where instrument approach charts are identified by a shaded
background to either the minima titles for IAL plates or the published
minima for DME or GPS arrival procedures, landing, circling
and alternate minima have been calculated assuming the use of
forecast terminal QNH. These minima may be reduced by 100FT
whenever an actual aerodrome QNH is set. Approved sources of
actual QNH are ATC, ATIS, AWIS and CASA-approved meteorological
observers. An actual aerodrome QNH obtained from an
approved source is valid for a period of 15 minutes from the time of
receipt (Note: METAR QNH does not meet this requirement).5.3.3


Where the forecast area QNH is used, the minima used must be
increased by 50FT.

[allthecoolnamesarego]

Thanks Guys,

Seems the Mac won't download it, but the 'stupid' PC will.

Thanks again!

[Unhinged]

The default programme for reading acrobat documents on the Mac is Preview, but it won't follow links between documents, and that's required for the on-line docs. Change the default to Acrobat Reader and all will be well.

[allthecoolnamesarego]

Unhinged, Probably not the forum, but how do I do that??

[blueloo]

When you launch/open adobe reader (after you download and install it - if not already) - it should ask you if you want to make it the default.

Otherwise its:

To change a document’s application:


Select the document and choose File > Get Info.


Click “Open with” in the Info window.


Choose an application from the pop-up menu, or choose Other to locate a different application.


If you want to use the application you chose to open all similar documents (the same type as the current document and created by the same application), click Change All