Heliport
18th Aug 2007, 19:16
Many members are now using Photobucket's hosting service, but some members occasionally have difficulty.
It's very easy.
(1) Photobucket
Go to your album and choose the picture you want to post.
Under the 'thumbnail' of that picture you'll see 3 boxes.
Left click on the 'IMG Code' box. This will automatically copy the image code for you. (A yellow "Copied" flag will pop up.)
Now go to Rotorheads.(2) Rotorheads
Begin a new post in the usual way.
You are now ready to paste the code you copied above.
Right click, and select "paste" from the drop-down menu.
The image code for the picture will appear.
Depending upon the editing mode selected, you'll see either your picture or a code.
Give some information about the photograph.
Repeat the process for any further pictures.
When you've finished copying your pictures, submit your post in the normal way.
Voila! We'll all be able to enjoy your pictures.
Tip: It's best to have two browser windows open at the same time, especially if posting more than one picture: One for Photobucket and one for Rotorheads.Note: Some free photo-hosting services offer only limited features so it's not possible to direct link in this way. eg Geocities, Tripod, Airlinersnet. (The picture may appear when you first post it, but then disappears within hours - sometimes replaced by an advertisement for their website.) Other methods, trouble shooting and photography tips: How to Post Pictures (http://www.pprune.org/forums/showthread.php?t=145070)Copyright: In the Rotorheads forum, we do not allow pictures with copyright notices, email addresses, promotional material etc embedded or attached. More information about what is and isn't permitted >>> Copyright Notices in Rotorheads (http://www.pprune.org/forums/showthread.php?s=&threadid=133982)Finally: Pictures are more interesting if you add some information: eg Type, location, the job, when it was taken.
Heliport
It's very easy.
(1) Photobucket
Go to your album and choose the picture you want to post.
Under the 'thumbnail' of that picture you'll see 3 boxes.
Left click on the 'IMG Code' box. This will automatically copy the image code for you. (A yellow "Copied" flag will pop up.)
Now go to Rotorheads.(2) Rotorheads
Begin a new post in the usual way.
You are now ready to paste the code you copied above.
Right click, and select "paste" from the drop-down menu.
The image code for the picture will appear.
Depending upon the editing mode selected, you'll see either your picture or a code.
Give some information about the photograph.
Repeat the process for any further pictures.
When you've finished copying your pictures, submit your post in the normal way.
Voila! We'll all be able to enjoy your pictures.
Tip: It's best to have two browser windows open at the same time, especially if posting more than one picture: One for Photobucket and one for Rotorheads.Note: Some free photo-hosting services offer only limited features so it's not possible to direct link in this way. eg Geocities, Tripod, Airlinersnet. (The picture may appear when you first post it, but then disappears within hours - sometimes replaced by an advertisement for their website.) Other methods, trouble shooting and photography tips: How to Post Pictures (http://www.pprune.org/forums/showthread.php?t=145070)Copyright: In the Rotorheads forum, we do not allow pictures with copyright notices, email addresses, promotional material etc embedded or attached. More information about what is and isn't permitted >>> Copyright Notices in Rotorheads (http://www.pprune.org/forums/showthread.php?s=&threadid=133982)Finally: Pictures are more interesting if you add some information: eg Type, location, the job, when it was taken.
Heliport