Does anyone know the TBO for the Limbach 2000EA engine, It would appear to be 1000 hrs but i think this is old info and it has been extended. Anyone know the facts?
From Limbach TB9.10
905.700.009.105
Subject: Time between overhauls (TBO)
Affected engine models: All engine models
a.) LIMBACH L 1700 E0, EA, EB, EC, ED
b.) LIMBACH L 2000 DA, E0, EA, EB, EC
c.) LIMBACH L 2000 EC (*)
d.) LIMBACH L 2400 EB1.AA, EB1.AB, EB1.AC
e.) LIMBACH L 2400 EB1.AD
f.) LIMBACH L 2400 DF, DT, EE, EF, ET
Background
Information: Operational experience with engines of the abovementioned models allows for increase of TBO.
Priority: Immediate
Compliance: The time between overhaul (TBO) is defined as follows:
for engine models as listed under
a.) 1000 hrs, (**)
b.) 1000 hrs,
c.) 1250 hrs, (*)
d.) 1400 hrs,
e.) 450 hrs,
f.) 1000 hrs.
(*) only for engines used in Airships from American Blimp Corporation
(**) On engines series L 1700, the time between overhaul can be increased by a maximum of 2 * 100 hrs,
if an inspection according to Checklist No.: 910.000.050.000 is carried out. The engine may not be older
than 5 years in this case.
Note: This document has been translated to the best of our knowlege. In case of doubt however only the
German original shall be considered authoritative.
Approval: This Technical Bulletin is approved in accordance with the procedures of the LBA approved development
organization LBA.NSD.006.
All other Technical Bulletins can be found at www.limflug.de its free to register, but the registration process in in German