Need Pilot/Crewperson SE QLD

[Rotor1]

We are looking for a low hour CPLH pilot, new CPLH pilot that would like to join a growing Company in SE QLD. Must have above average computer skills (Microsoft excel etc),Truck licence, with truck DG Ticket, desirable, H500 endorsment, low level approval. must be able to be away from home for at least two weeks at a time

Please send me a private message on ppune with your contact details and I will call you back if your are what we are seeking.

Cheers Damien :ok:

[CYHeli]

This post is very good to see Rotor1.
Good luck with finding the right person. :ok:

CYHeli

[170']

Well done Rotor 1 and Mozzy...:ok:
Everybody whines about finding entry level jobs, nice to see someone taking positive action on prune...Good job!
170

[Rotor1]

I wish to thank all who have replied so far. The response has been very good,with a few people that fit the bill so far however, if there are any more out there please send me more messages and i will answer you as soon as possible. For the right person this will turn into a full time position after three months of trial.

Thanks again Rotor1 :ok:

[lukas]

Gday, yes very interested, have around 100hrs on a 500 in PNG. for more info and my cv contact me asap on 0418240840.

[Rotor1]

We are now looking for two people for our company. I am now looking for any H500 pilots with at least 500 hours turbine and 50 on type H500 or H520N
Please PM and I will respond as soon as possible.
These will be based in QLD Australia but the work will take you all over Australia.
Rotor1 :ok:

[jetflite]

Rotor 1 i have PM you & feel i have all of the boxes ticked for this job, looking forward to your response.

[Rotor1]

Thanks Jet See you tuesday
Damien

[Rotor1]

I wish to thank all who applied. We have found people for our crewman low time pilot position, however we are still seeking a pilot with 1000 hours total 500 turbine and 50 on type H500, or MD520N


Cheers Damien:ok:

[Rotor1]

We are still looking for any H500 pilots with at least 500 hours turbine and 50 on type H500 or H520N, 1000 hours total time,

Please PM and I will respond as soon as possible.

Also seeking H500 520N engineers again PM me and I will respond asap

These will be based in QLD Australia but the work will take you all over Australia.
Rotor1 :ok:

[7balja01]

so..... rotor1......

whats the rate....:suspect:

[Big Foot]

Why the 500 hours turbine?