PDA

View Full Version : MTOW definition


JG1
25th Sep 2003, 02:46
Strictly speaking, is the MTOW a structural limit and the RTOW the operationally limited TOW ?

Searching through definitions, some texts describe MTOW as being changeable (WAT-limited etc). But is it? Isn't MTOW just that, structurally, with the RTOW the variable? (very strictly speaking)

thanks

alatriste
25th Sep 2003, 04:44
Yes you are very right.

MTOW is always the same regardless of airport, mountains or ambient conditions. MTOW might be structurally calculated but be advised that a lot of operators reduce the manufacture MTOW for economics, cause landing fees are paid on MTOW basics.

RTOW depends on several variables. It is also known as OTOW, PTOW and few papers call it also MTOW (confussing)

john_tullamarine
25th Sep 2003, 17:07
MTOW is the maximum permitted certification takeoff weight as listed in the Type Certificate Data Sheets and the limitations section of the Flight Manual. It is the lowest of a number of limiting weights determined during the certification process and represents the maximum weight at which the certifications standards were shown to be met during the design and certification process.

The maximum weight on the day from a given runway (often referred to as RTOW - regulated TOW) is the lowest of a number of limiting weights determined for the day, some structural, most performance. This weight may, on occasion, equal the MTOW but usually is somewhat less to ensure that a variety of performance limits are met.

JG1
26th Sep 2003, 01:24
Thanks very much guys.

compressor stall
26th Sep 2003, 08:41
re: reduced MTOW.

In some parts of the world, en route IFR charges are based on MTOW too.

CS