PPRuNe Forums - View Single Post - Beeping/Switching Up MR Rotor RPM for Takeoff
Old 7th October 2012 | 08:20
  #26 (permalink)  
ATN
20 Anniversary
 
Joined: Aug 2003
Posts: 155
Likes: 1
From: France
S 365 N and N2

To feed the discussion:

EC 155
Use of RPM HIGH is limited to CAT A helipad or increased slope operations for IAS < Vy. (FLM section 2.4, 1.3).

AS 365 N and N2
CAT A clear area, OEI at take off after TDP, beep the rotor to 325 Nr, in the
2nd segment for the N, the 1st segment for the N2.

EC 225
OEI at take off after TDP, adjust collective pitch as necessary to maintain NR at approximately 96 % (FLM section 3.1, 6.1 page 8).

Cheers

ATN

Last edited by ATN; 7th October 2012 at 08:21.
ATN is offline  
Reply